NEC NP3150 User Manual page 108

Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT
TER button.
PRO R
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
E
3. Make settings for each item as required.
ACTIVE..............................Place a check mark to enable the program.
DAY ...................................Select days of the week for the program. To execute the program from Monday to Friday, select
TIME .................................Set the time to execute the program. Enter time in 24-hour format.
FUNCTION ........................Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
ADVANCED SETTINGS ......Select power on/off or a type of video source for the selected item in [FUNCTION].
REPEAT .............................Place a check mark to repeat the program continuing basis. To use the program this week only,
[MON-FRI].To execute the program in everyday basis, select [EVERYDAY].
by setting [ADVANCED SETTINGS]. Selecting [SOURCE] will allow you to select a video source by
setting [ADVANCED SETTINGS].
clear the check mark.
6. Using On-Screen Menu
or button to select [SETTINGS] and press the EN-
93