Download Print this page

NEC NP1150 - XGA LCD Projector Manual

Np1150/2150/3150/3151w wpa guide.
Hide thumbs

Advertisement

LCD Projector
NP3150/NP2150/
NP1150/NP3151W
WPA Setting Guide
WPA
Security
Network
S e
Supported
Authentication
Method
WPA-PSK
WPA-EAP
WPA2-PSK
WPA2-EAP
c u
r i t y

Advertisement

   Related Manuals for NEC NP1150 - XGA LCD Projector

   Summary of Contents for NEC NP1150 - XGA LCD Projector

  • Page 1

    LCD Projector NP3150/NP2150/ NP1150/NP3151W WPA Setting Guide Supported Authentication Method WPA-PSK WPA-EAP WPA2-PSK WPA2-EAP Network Security r i t y...

  • Page 2: Table Of Contents

    (3) Great care has been taken in the preparation of this guide; however, should you notice any questionable points, errors or omissions, please contact us. (4) Notwithstanding article (3), NEC will not be responsible for any claims on loss of profit or other matters deemed to result from using the Projector.

  • Page 3: Introduction

    Introduction Thank you for purchasing the LCD Projector NP3150/NP150/NP1150/NP3151W. This guide explains how to set the enhanced wireless LAN security (authentication method) on the projector as shown on the table below. Set the projector according to the security environment of your network. Authentication Encryption Digital certifi-...

  • Page 4

    Other Notes • Contact your network administrator for information about access point and settings for authentication server (authentication method, encryption type, EAP type, and digital certificates). • For using the on-screen menu on the projector, see the “User’s Manual” (PDF) on the supplied CD-ROM.

  • Page 5: Setting.wpa-psk.or.wpa2-psk

    1. Setting WPA-PSK or WPA2-PSK From the on-screen menu on the projector, select [SETUP] → [INSTALLATION()] tab → [NETWORK SETTINGS] screen and follow the instructions below. ➊ Display the [NETWORK SETTINGS] screen. • See page 17 of “Wired and Wireless Network Setup Guide”...

  • Page 6

    ➏ Use the SELECT ▼▲ button to select a connecting SSID, and then press the SELECT ▶ button to select [OK]. Finally press the ENTER button. • Select the SSID for which WPA-PSK or WPA-PSK is set. • Select [INFRASTRUCTURE ( )] for [NET- WORK TYPE].

  • Page 7

    ⓬ Use the SELECT ▼ button to select the [KEY] field and press the ENTER but- ton. The character entry screen (software keyboard) will be displayed. Set a key. • A key must be between 8 and 3 characters in length. •...

  • Page 8: Setting.date,.time.preset

    2. Setting DATE, TIME PRESET Before installing a digital certificate on the projector, you are required to set [DATE, TIME PRESET] for checking the expiration date of the digital certificate. Set the current date and time (i.e., local time), and the time zone. Important: •...

  • Page 9: Setting.wpa-eap.or.wpa2-eap

    3. Setting WPA-EAP or WPA2-EAP Select a wireless LAN compliant WPA-EAP or WPA-EAP authentication and install a digital certificate on the projector. ❶ Set [DATE, TIME PRESET] on the pro- jector. (See previous page) ❷ Use a computer to save digital certifi- cates (files) for WPA-EAP or WPA2-EAP setting to your USB memory device.

  • Page 10

    ❼ Use the SELECT ▼▲ button to select [TKIP] or [AES] and press the ENTER button. Select [TKIP] or [AES] according to the setting for your access point. ❽ Use the SELECT ▲ button to select the [SECURITY] tab and press the SELECT ▶...

  • Page 11: Enter Button

    ❿ Use the SELECT ▼ button to select [CLIENT CERTIFICATE] and press the ENTER button. A list of files (thumbnail screen) will be dis- played. • For operating the thumbnail screen, see “5. Using the Viewer” in the “User’s Manual” (PDF).

  • Page 12

    ⓭ Use the SELECT ▼ button to select [CA CERTIFICATE] and press the ENTER button. A list of files (thumbnail screen) will be dis- played. ⓮ On the thumbnail screen, select a digi- tal certificate (DER format file) saved in your USB memory device and press the ENTER button.

  • Page 13

    HINT: • The PKCS#1 format digital certificate including a CA certificate will be installed as a root CA certificate. ② Selecting [PEAP-MSCHAPv2] for [EAP TYPE]: ❾ From the [AUTHENTICATION] page, use the SELECT ▼ button to select [EAP TYPE] field and press the ENTER but- ton.

  • Page 14

    ⓭ After completing setting the password, use the SELECT ▼ button to select [CA CERTIFICATE] field and press the EN- TER button. A list of files (thumbnail screen) will be dis- played. • For operating the thumbnail screen, see “5. Using the Viewer”...

  • Page 15

    ⓱ Use the SELECT ▼ button to select [OK] and press the ENTER button. This will complete setting [PEAP- MSCHAPv2] for [EAP TYPE] in [WPA-EAP] or [WPA2-EAP]. HINT: Clearing the digital certificate that is installed on the projector To clear the digital certificate installed on the projector, follow the steps below. By doing the following procedure, all the digital certificates for the currently displayed profile will be cleared.

  • Page 16: Checking.authentication.status.on.[information].screen

    4. Checking Authentication Status on [INFORMATION] Screen You can check your authentication status on the [INFORMATION] screen from the on- screen menu. ❶ Display the [INFORMATION] screen. • Use the first tab (main menu) to select [IN- FORMATION]. ❷ Select the [WIRELESS LAN(1)] tab. The current authentication status will be dis- played in the [AUTHENTICATION] field.

Comments to this Manuals

Symbols: 0
Latest comments: