Disabling The Security - NEC NP3150 User Manual

Disabling the Security

1. Press the MENU button.
The menu will be displayed.
NOTE: Immediately after the projector has been turned on and the "Projector is locked! Enter your keyword." message is dis-
played at the bottom of the screen, pressing the MENU button will display the Keyword entry will be displayed. At this time,
pressing the MENU button will display the menu.
2. Press the SELECT
The page tab [BASIC] will be highlighted.
3. Press the SELECT
4. Press the SELECT
ton.
5. Press the SELECT
ton.
The Keyword entry screen will be displayed
6. Press the ENTER button.
The Software keyboard will be displayed.
7. Use the same procedures as steps 1 to 8 described in the "Assigning a Keyword for the first time" sec-
tion to enter "1234".
Each time one number is entered, an " " (asterisk) will appear. Keyword appears as asterisks so the real key-
word is hidden.
8. After entering your keyword, highlight [OK] and press the ENTER button.
The Software keyboard will disappear. The Security screen will be displayed.
9. Highlight [ON] and press the SELECT
10.Press the SELECT
The Security Function will be disabled when the projector is turned on next time.
NOTE: Do not forget your keyword. However, if you forget your keyword, NEC or your dealer will provide you with your Release
Code upon proof of ownership.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
button to highlight [SETUP] and press the ENTER button.
button twice to highlight the page tab [INSTALLATION].
button three times to highlight [SECURITY SETTINGS] and press the ENTER but-
button four times to highlight [SECURITY] - [SETTINGS] and press the ENTER but-
button to highlight [OFF].
button to highlight [OK] and press the ENTER button.
49
4. Convenient Features