NEC NP3150 User Manual page 131

Selecting Default Source [DEFAULT SOURCE SELECT]
LAST ...................... Sets the projector to default to the previous or last active input each time the projector is turned on.
AUTO ..................... Searches for an active source in order of COMPUTER1
COMPUTER 1 ........ Displays the RGB source from the COMPUTER 1 IN connector every time the projector is turned on.
COMPUTER 2 ........ Displays the RGB source from the COMPUTER 2 IN connector every time the projector is turned on.
COMPUTER 3 ........ Displays the RGB source from the COMPUTER 3(DVI-D) IN connector every time the projector is turned
on.
COMPONENT ......... Displays the component source from the COMPONENT IN connector every time the projector is turned
on.
VIDEO .................... Displays the Video source from the VIDEO IN connector every time the projector is turned on.
S-VIDEO ................ Displays the Video source from the S-VIDEO IN connector every time the projector is turned on.
VIEWER ................. Displays slides from the USB memory device every time the projector is turned on.
NETWORK ............. Displays a signal from LAN port (RJ-45) or the USB Wireless LAN Unit.
Selecting Signal Format [SIGNAL SELECT]
O P ER
Selecting [COLOR SYSTEM]
O
Setting MONITOR OUT Connector [OUT TERMINAL]
LAST ...................... The signal from the last COMPUTER 1, COMPUTER 2 or COMPONENT input will be output to the MONI-
TOR OUT connector.
COMPUTER 1, 2 .... The signal from the COMPUTER 1 or COMPUTER 2 input will be output to the MONITOR OUT connector.
COMPONENT ......... The signal from the COMPONENT input will be output to the MONITOR OUT connectors.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
VIDEO S-VIDEO VIEWER
O P ER O P
R
COMPUTER2
COMPUTER1 and displays the first found source.
ER
R
R O PO E
116
6. Using On-Screen Menu
COMPUTER3 COMPONENT
R
O OR O