NEC NP3150 User Manual page 92

[ENTRY LIST]
Using the Entry List
W
E
Entering the Currently Projected Signal into the Entry List
1. Display the Entry List.
2. Use the SELECT
3. Use the SELECT
LOAD ..................... Enables you to select a signal from the list.
STORE ................... Enables you to store the currently projected signal.
CUT ........................ Enables you to remove a selected signal from the list and place it on the "clipboard" in the projector.
COPY ..................... Enables you to copy a selected signal from the list and place it on the "clipboard" in the projector.
PASTE .................... Enables you to paste the signal placed on the "clipboard" to any other line of the list.
EDIT ....................... Enables you to change SOURCE NAME, INPUT TERMINAL, LOCK, and SKIP.
T H E T R U S T E D S O U R C E F O R P R O J E C T O R L A M P S A N D A C C E S S O R I E S
or button on your remote control or the projector cabinet to select any number.
button to select [STORE] and press the ENTER button.
E R
6. Using On-Screen Menu
E
E W
77
E