Making Connections; Connecting Your Computer - NEC NP-P525UL User Manual

5. Making Connections

NOTE:
• Use the attached specified cables with this projector so as not to interfere with radio and television reception.
For HDMI, LAN, RS-232C and AUDIO, please use a shielded signal cable.
For 15-pin mini D-Sub, please use a shielded signal cable with ferrite core.
Use of other cables and adapters may cause interference with radio and television reception.

5-1. Connecting Your Computer

Computer cables and HDMI can be used to connect to a computer. The HDMI cable is not enclosed
with the projector. Please get ready a suitable cable for the connection.
NOTE:
• Signals supported by Plug & Play (DDC2)
COMPUTER IN
analog
Yes
NOTE:
• The projector is not compatible with video decoded outputs of the NEC ISS-6020 switcher.
• An image may not be displayed correctly when a Video source is played back via a commercially available scan converter.
This is because the projector will process a video signal as a computer signal at the default setting. In that case, do the following.
* When an image is displayed with the lower and upper black portion of the screen or a dark image is not displayed correctly:
Project an image to fill the screen and then press the AUTO ADJ. button on the remote control.
INPUT
HDMI 1 IN
digital
Yes
86
HDMI 2 IN
digital
Yes