Barco MDSC-2232 DDI User Manual page 63

Video formats
Remote control
Power source requirements
for external power supply
Power source requirements
for display power input
Power supply DC output cable
length
Power consumption (nominal)
Power management
OSD languages
Dimensions display (W x H x
D)
Dimensions power supply (W
x H x D)
Dimensions packaged (W x H
x D)
Net weight display
Net weight power supply
Net weight packaged
Mounting standard
Recommended modalities
Certifications
K5902105 (451920611791) MDSC-2232 25/08/2015
VGA & DVI : Up to 1920x1200 at 60Hz (reduced blanking)
Maximum pixel clock: 165MHz
Maximum Hor freq: 90kHz
Maximum Ver freq: 75Hz
Standard PAL and NTSC for S-Video, Composite and Component
Component YPbPr/ RGBS: HDTV - up to 1080i & 1080p
SDI Format Supported: 625/25 PAL, 525/29.97 NTSC, 1080i50,
1080i59.94, 1080i60, 720p50, 720p59.94, 720p60, 1080p50,
1080p59.94, 1080p60
SDI Compliance: SMPTE 425M (Level A), SMPTE 424M, SMPTE
292M, SMPTE 259M-C, SMPTE 296M, ITU-R BT.656, ITU-R BT.601
DisplayPort 1.1a: up to 1920 x 1200 60Hz
RS-232 (D-sub 9-pin)
100-240VAC, 50/60Hz (Medical Power supply, Class I, 2MOPP between
primary and secondary)
+24 VDC ±10% / 2.2 A (MDSC-2232 DDI)
+24 VDC ±10% / 3 A (MDSC-2232 MNA)
2.0 m (6.6 ft)
48W typical (MDSC-2232 DDI)
65W typical (MDSC-2232 MNA)
DVI-DMPM states supported
Power On state
Active-Off state
English, French, German, Spanish, Italian
777 x 472 x 92 mm (30.6" x 18.6" x 3.5")
210 x 103 x 52 mm (8.27" x 4.06" x 2.05")
970 x 625 x 200 mm (38.19" x 24.60" x 7.87")
12.9 kg (28.4 lbs) (MDSC-2232 DDI)
13.3 kg (29.3 lbs) (MDSC-2232 MNA)
1.2 kg (2.65 lbs)
19.0 kg (41.9 lbs) (MDSC-2232 DDI)
19.4 kg (42.7 lbs) (MDSC-2232 MNA)
VESA (100 x 100 mm, 200 x 100 mm)
Endoscopy, Laparoscopy, PACS, PM, US, CT, MR
• IEC 60601-1: 2012 Edition 3.1 (Medical electrical equipment – Part 1:
General requirements for basic safety and essential performance)
• EN 60601-1: 2006 +A1:2013 (Medical electrical equipment". Part 1:
General requirements basic safety and essential performance)
• ANSI/AAMI ES 60601-1: 2005/(R)2012 and A1:2012, C1:2009/(R)2012
and A2:2010/(R)2012 - Med. El. Equip., Part 1: general req. for basic
safety and essential performance.
• CAN/CSA-C22.2 No. 60601-1: 14 Medical Electrical Equipment - Part
1: General Requirements for Basic Safety and Essential Performance
(Harmonized with Ed. 3.1)
• Approvals/Marking: CE c-UL-us, DEMKO, PSE, KCC (CCC certification
is pending)
6. Important information
61