Clock/Line; Display Format Menu; Main Source (Primary Source) - Barco MDSC-2232 DDI User Manual

5. Advanced operation
3. Enter the Phase submenu.
The command bar Phase is highlighted.
4. Set the phase as desired and confirm.
5.2.6

Clock/Line

This menu item is only available when VGA input is connected.
About clock/line
If the result of the Auto Adjustment procedure described above isn't satisfactory, the Clock/Line can be
manually adjusted by following this procedure.
To manually adjust the phase
1. Bring up the OSD main menu.
2. Navigate to the Picture advanced menu.
3. Enter the Clock/Line submenu.
The command bar Clock/Line is highlighted.
4. Set the clock/line as desired and confirm.
5.3

Display Format menu

Overview
•

Main Source (Primary Source)

• Component Mode
• Zoom
• Image Size
• 2 Picture Mode
nd
• 2 Picture Source
nd
• 2 Picture Position
nd
• Picture Swap
5.3.1 Main Source (Primary Source)
About main sources
The available main sources for your display are:
38 K5902105 (451920611791) MDSC-2232 25/08/2015