In The Event Of A Fault - AEG Favorit CE Instruction Book

Instruction book

In the event of a fault

Before calling out an engineer, please check through the details
below because some faults can be rectified easily without the
need to call out an engineer.
Fault
The programme will not
start.
The dishwasher is not
filling with water.
Water not discharged at
end of cycle.
Dishes not washed satis-
factorily.
20
Check
Is the door closed properly?
Have you pressed the On/Off button?
Is the water tap turned on?
Is the dishwasher plugged in?
Has the fuse blown?
Is the delayed start-button pressed in?
Is the previous programme finished?
Is the water tap turned on?
Has your domestic water supply been cut
off temporarily?
Is the water inlet hose kinked or blocked?
Is the filter inside the inlet hose blocked?
Is the water pressure too low?
Did you open the door before the pro-
gramme cycle finished?
Are the filters clogged?
Has anything prevented the spray arm
from rotating?
Are the spray arm holes clogged?
Were the dishes packed too close
together?
Are the filters clogged?
Are the filters fitted correctly in place?
Did you use enough detergent?
Is the salt container cap properly closed?
Did you select a programme with too low
temperature?
Is the rinse aid dispenser empty?