Cancelling The Drying Phase; Setting The Delay Start - AEG Favorit CE Instruction Book

Instruction book

Cancelling the drying phase

In case you do not want to wait until the drying phase is completed, you
can cancel it.
1. Press in the On/Off button. The control lamp for the On/Off button
goes out.
2. Open the door. The drying phase is cancelled.

Setting the delay start

The programme start can be delayed by 3, 6 or 9 hours.
1. Press in the On/Off button.
2. Press the delay start button repeatedly, until the lamp next to the
required hours of delay is lit.
3. Press the button for the required programme.
4. After the set delayed start time has elapsed, the programme starts.
Reset the delayed start:
If the programme has not started, you can change the set time with the
delayed start button.
Cancelling the delayed start:
If the programme has not started, the delayed start can be cancelled. Press
the delay start button repeatedly, until none of the lamps next to the hours
are lit. The required programme starts immediately.
Switching the dishwasher off / unloading
Do not switch the dishwasher off until the indicator lamp
gramme cycle end is lit.
1. Press in the On/Off button. The control lamp for the On/Off button
goes out.
2. Leave the dishes in the dishwasher for approx. 15 minutes after
the end of the programme so that they dry better and cool down.
3. Check the strainers/filters to see if they need to be cleaned when
the dishwasher has finished the programme.
Hot dishes are sensitive to mechanical shocks. Always let the dis-
hes cool down before unloading.
18
for the pro-