Warning Tones Indicating A Fault In The Dishwasher - AEG FAVORIT 86050 VI User Instructions

Operating Instructions

... Warning tones indicating a fault in the dishwasher.

• If one or two repetitive warning tones can be heard after the start of
a programme, they are indicative of a fault in the dishwasher that
you can probably rectify yourself.
After rectification of the fault, press the button for the wash pro-
gramme that has been started and close the door of the dishwasher.
The wash programme continues.
If the same warning tone is heard again, please contact customer
service.
• If more than two repetitive warning tones can be heard after pro-
gramme start, please contact customer service. Customer service will
need to know the number of tones and which indicators on the con-
trol and display field are flashing.
Malfunction
1 continuously repeated
warning tone can be heard,
the programme display is
flashing in the control and
display field, and the
control indicator is perma-
nently illuminated:
no water is running into the
dishwasher.
2 warning tones that are
continuously repeated can
be heard,
the programme display and
I
the
control and display field are
flashing.
3 warning tones that are
continuously repeated can
be heard and the
L
indicators on the con-
trol and display field are
flashing.
30
^
indicator on the
I
and
Possible Cause
Tap is blocked or furred
with lime-scale.
The filter (where present)
in the threaded hose fit-
ting at the water inlet
valve is blocked.
The water inlet hose is not
correctly laid.
The siphon is blocked.
The water drain hose is
not correctly laid.
The leak prevention sys-
tem has been triggered.
Solution
Clean tap.
Clean the filter in the
threaded hose fitting.
Check hose installation.
Clean siphon.
Check hose installation.
Close the tap and contact
your local AEG Sevice
Force Centre.