AEG Favorit CE Instruction Book page 53

The floor of the machine is held with screws
at the front, and clipped in at the back.
It contains the bosses for the overflow water
and the flooding switch.
After removal you come to the most
important functional components.
After loosening the screws
of the two holders and the
yoke, the circulation pump
pump/continuous flow
heater unit can be taken out.
The bayonet breech of the
pump impeller housing can
be simply released, for
possible cleaning.
- 25 -
Spares Operation - R.Kurzke 02/02 599 513 616 EN