Table of Contents
Advertisement
Service tips
Replacement of the components within the door.
The electronics can then be
snapped out.
Spares Operation - R.Kurzke 02/02
Remove the screws from the frame.
Carefully unclip the front of the door.
Before finally opening, unclip the on/off LED.
The dosing unit is held by
screws.
After removing these screws,
removed from the door breech.
After removing the spring, the
door-opener can be removed
from its hinges.
Re-assembly is carried out in
the reverse order.
You need
screwdriver
Torx TX20
the components can be
- 22 -
599 513 616 EN
Hide quick links:
Advertisement
Table of Contents
