Identification - Barco ELM R12 Owner's Manual

Hide thumbs Also See for ELM R12:
Table of Contents

Advertisement

Service Mode
SERVICE

IDENTIFICATION

CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
SERVICE
BARCO LOGO
PRESET INPUT BALANCE
ADD INS
I2C DIAGNOSIS
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
Identification
How to display the Identification screen ?
1
Push the cursor key é or ê to highlight 'Identification' (menu 1).
2
Press ENTER to display the Identification screen (menu 2.
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
LAMP
MORE...
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 1
The information
The following information is available on the identification screen:
- type of projector
- projector address
- software version
- installation configuration
- baud rate
- text ON
- projector serial number
- projector run time
Detailed description
- type of projector : BARCOELM R12
- software version
- Proj. Address : to change the address of the projector, see Change Projector Address in this chapter.
- Installation : possible installations :
To change the installation configuration, follow the instructions in chapter 'Installation Guidelines'.
- Baud rate : transfer speed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be the
same as the baud rate of the connected computer. When there is a difference, consult 'Change Baudrate PC' in this chapter.
9-2
Downloaded from ProjectorsManual.com Manuals
PRESET INPUT BALANCE
WHITE BALANCE
BLACK BALANCE
DEFAULT
Select with <ENTER>
<EXIT> to return
red with é or ê
blue with è or ç
ADD-INS
LIGHT SENSOR : [INACTIVE]
Select with é or ê
<ENTER> to toggle/select
<EXIT> to return.
BARCO
ELM R12
Proj. address : 001
Soft. version : 3.0
Config : front/
ceiling
Baudrate PC : 9600
text : ON
Serial no.: 1010200
Run time : 100 h
Select with é or ê
then <ENTER>
<EXIT> to return.
menu 2
* Front/Ceiling
* Front/Table
* Rear/Ceiling
* Rear/Table
Adjust
<ENTER> to toggle/select
DECODER
MOTOR DRIVER
LIGHT SENSOR
LAMP DRIVER
LAMP DRIVER
POWER SUPPLY
INPUT SELECTOR
PMP INPUT SELECTOR
INPUT SELECTOR
LAMP MODULE
BARCO LOGO
STATUS : [ON]
BACKGROUND : [ON]
SHIFT
HOT KEY : [TEXT]
Select with é or ê
<EXIT> to return.
I2C DIAGNOSIS
D C A
12H # # #
1AH # # #
1CH # # #
20H # # #
22H # # #
30H # # #
46H # # #
4AH # # #
7EH # # #
A0H # # #
Scroll with é or ê
<EXIT> to return.
5976072 BARCOELM R12 05052000

Advertisement

Table of Contents
loading

Table of Contents