All input signals are always 75 ohm terminated, even in the "not selected" mode.
How to select the RGB3S input :
Key in the corresponding slot number on the RCU or the local keypad.
Indication on the input slot menu :
RGB3L-SS = RGB with separate Tri level sync.
RGB3L-SOG = RGB with Tri level sync on green.
Straps on Module Level :
Floating or non-floating input.
Red :
J3 : strap "yes" : non floating
Green : J4 : strap "yes" : non floating
Blue : J5 : strap "yes" : non floating
H/C :
J6 : strap "yes" : non floating
V :
J7 : strap "yes" : non floating strap "no" : floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 : separate sync or sync on green.
Factory preset : separate sync.
-
-
Non-Floating
Floating
5976072 BARCOELM R12 05052000
Downloaded from ProjectorsManual.com Manuals
strap "no" : floating
strap "no" : floating
strap "no" : floating
strap "no" : floating
E ' ÃT p à r yr p v
T r h
h rà p
T p à Ãt
rr
-
-
-
AyhvtÃ
ÃÃsyhvtÃv
Connections
4-13