Communication Connections; Rs232 Connections; Communication Port For Communication With Peripherals - Barco ELM R12 Owner's Manual

How to select the Digital input :
Key in the corresponding slot number on the RCU or the local keypad.
Note : When a RCVDS05 is connected to the projector, the SDI input is available by keying in 85 or 86 on the RCU.

Communication Connections

Available communication connections :
RS232/422 connection between projector and computer.
Communication port for communication with BARCO peripherals.
Trigger output

RS232 Connections

RS 232/422 input and RS232/422 output of the projector.
The projector has a RS232/422 input port that allows it to communicate with a computer.
The RS232/422 output port can be used as loop through to the next device.
Two way
Hardwired
hardwired
remote remote
CTRL 3 CTRL 2
R G B
O n
H ig h Ba nd wi d t h R G B A N A LO G IN P U T
Applications
a) remote control :
- easy adjustment of projector via IBM PC (or compatible) or MAC connection.
- allow storage of multiple projector configurations and set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) data communications :
- sending data to the projector or copying the data from the projector to a hard memory device.
Set up of the Baud Rate for Communication with a Computer.
See 'Change Baudrate PC' in chapter 'Service mode'.

Communication port for communication with peripherals.

Connecting a RCVDS 05 to the projector.
- Up to 20 inputs with the RCVDS 05 and 90 inputs when RCVDS's are linked via the expansion module.
- Serial communication with the projector.
- Remote control buttons on the RCVDS to control the projector (source selection and analog settings).
- The selected source number will be displayed on a 2 digit display and the selected input module will be indicated with a LED on the
rear.
For more information about the use of : the RCVDS 05, consult the owner's manual.
5976072 BARCOELM R12 05052000
Downloaded from ProjectorsManual.com Manuals
Green O peration Diagnostic Code IR-Rec eiver
Red Stand-by
Sync OK IR O n
Hardwired
COMM PORT TRIGGER OUT
remote RS232/422 IN RS232/422 OUT
CTRL 1
H / C V R G B H / C V
On
H ig h B a ndw i d th 5 C A B LE IN P U T
56
FRQQHFWLRQ
O U T IN O U T I N
On
T 9 DÃ9 DB DU6 GÃDI Q V U T 9 DÃ9 DB DU6 GÃDIQ VU
R G B V
H / C
69,'(2 9,'(2
O n
W D9@ PDIQ V U
Connections
4-15