Beko SLER30530SS User Manual page 48

CAUTION:
After a clean cycle, remove soil deposits with
vinegar water.
During the Self-Cleaning cycle, the electrical
flow to hob burners will be cut. After turning
the function and thermostat knob to off
position, the door lock will be automatically
opened. When the oven gets cool , the elec-
trical flow to hob burners will be started.
During the Self-Cleaning cycle, the lamp
cannot be operated.
WARNING:
If there is a fire in the oven during self-clean,
turn the oven off and wait for the fire to go
out. Do not force the door open. Introduction
of fresh air at self-clean temperatures may led
to a burst of flame from the oven. Failure to
follow this instruction may result in severe
burns.
Clean oven door
To clean the oven door, use warm water with
washing liquid, a soft cloth or sponge to clean
the product and wipe it with a dry cloth.
Don't use any harsh abrasive cleaners or
sharp metal scrapers for cleaning the oven
door. They could scratch the surface and
destroy the glass.
Removing the oven door
When removing the oven door, make sure oven
is cool and power to the oven has been turned
off before removing the door.
Failure to do so could result in electrical shock
or burns.
The oven door is heavy and parts of it are
fragile. Use both hands to remove the oven
door. The door front is glass. Handle carefully to
avoid breakage.
Grasp only the sides of the oven door. Do not
grasp the handle as it may swing in your hand
and cause damage or injury.
Failure to grasp the oven door firmly and
properly could result in personal injury or
product damage.
To avoid injury from hinge bracket snapping
closed, be sure that both levers are securely in
place before removing the door. Also, do not
force door open or closed—the hinge could be
damaged and injury could result.
Do not lay removed door on sharp or pointed
objects as this could break the glass. Lay on a
flat, smooth surface, positioned so that the door
cannot fall over.
Oven door can be removed in order to clean the
inside of oven easily
1. Open the oven door completely.
2. Press the hinge clamps located at both sides
of the door backwards.
1 Hinge clamp
2 Hinge
3. Move the oven door to a slightly inclined
position.
4. Raise the oven door forwards with your two
hands.
5. Once you complete cleaning, perform the
same procedure in reverse order to reinstall
the oven door.
Once you complete cleaning, perform the
same procedure in reverse order to reinstall
the oven door.
47/EN