Table of Contents
Advertisement
Do not let any objects fall onto the plate. Even
small objects (e.g. salt shaker) may damage the
burner/ plate.
DANGER:
Do not use glass ceramic plates with cracks.
Water may enter into the cracks and cause a
short circuit.
DANGER:
If the surface is damaged in any way (e. g.
visible cracks), switch off the device imme-
diately to reduce the risk of an electric shock.
If cooktop should break, cleaning solutions and
spillovers may penetrate the broken cook-top
and create a risk of electric shock. Contact a
qualified technician immediately.
WARNING
The glass ceramic burner/plate is equipped
with an operating lamp and a residual heat
indicator.
The residual heat indicator indicates the
position of the switched on plate and remains
illuminated after switching off. (When the
temperature of the plate falls below touchable
temperature the indicator light will go off).
NOTICE:
Quick heating glass-ceramic plates emit a
bright light when they are switched on. Do not
stare to bright light.
Switching the plate on
The burner/plate control knobs are used for
operating the plates. To obtain the desired cook-
ing power, turn the burner/ plate control knobs to
the corresponding level.
Cooking
1
2
3
level
Warning
Stewing,
cooking,
simmering
roasting
WARNING
When preparing flaming foods under a hood,
turn the fan on.
WARNING
If power is lost to an electric cook top while a
surface unit is ON, the surface unit will turn
back on as soon as power is restored. In the
event of power loss, failure to turn all surface
unit knobs to the OFF position may result in
ignition of items on or near the cook top,
leading to serious injury or death.
30/EN
Switching the plate off
Turn plate control knob to off position (top).
How to operate on the multiple region hot-
plates (model dependant)
Hobs with multiple region are used for different
diameter of pans.
By changing the knob position in clockwise
direction or counter clockwise direction, the
diameter of active zone can be adjusted.
1
Signal lamp hob
2
Single-circuit cooking plate Rear Left
3
Dual-circuit cooking plate Front Left
4
Central Single-circuit cooking plate
5
Digital Timer
6
Single-circuit cooking plate Front Right
7
Single-circuit cooking plate Rear Right
Switch off dual zone hotplates
In order to turn off the plates, set the knob to
"OFF" position by turning it.
1
Stage 1
2
Stage 2
NOTICE:
The 2nd zones of multiple region plates will
not operate by theirselves.
Hide quick links:
Advertisement
Table of Contents
