Table of Contents
Advertisement
Anti-Tip stability device installation instruc-
tions
1. Fix the bracket 1 to the floor with 4 screws (5)
in accordance with the dimensions and direction
indicated in Picture 1.
2. Measure dimension A of the product indicated
in Picture 2 according the height of counter.
Decide the hole on bracket 1 to which the
20/EN
bracket 2 will be secured. Complete the
installation by tightening parts 3 and 4.
3. Position the appliance on its place after
completing the installation.
4. Check whether the appliance is locked with
bracket by gently lifting it up from rear side to
front side.
Hide quick links:
Advertisement
Table of Contents
