Respironics 920M PLUS Operator's Manual page 18

Making Selections in Setup Mode
1. Upon entering setup mode, the displays will show
and the default value "no", the first setting.) Press and release the
advance switch (or press and hold to quickly scroll) to change the value
for this setting.
Note:
The menu starts at the current value stored in memory for the setting.
The menu will cycle through the range of values for that setting.
2. When the desired value appears, press and release the On/Standby
switch to store the value and advance to the next sequential setting
(year, month, etc.).
3. Continue this process until all settings are chosen.
When the setting sequence has been completed, the 920M PLUS exits
the setup mode and then displays
to begin normal operation.
Memory Clear, Calendar, and Clock Settings
Setting
a
Memory Clear
Delete (confirm clear)
Year
Month
Day
Hour
Minute
b
(Not available)
a
Choosing "yes" for both the
function) will clear the memory and exit setup mode.
b
settings 00 to 15 are not used at this time. Setting these values will
Prn
not affect the operation of the 920M PLUS.
12
-
(two dashes).
-
Appears in
SpO Display:
2
Clr
del
y
nn
d
h
nn
Prn
and
Clr
Clr
. (Memory clear
no
The unit is then ready
Range of Values
Appears in
Pulse Rate Display:
yes or no
yes or no
-
00 99
-
00 12
-
01 31
-
00 23
-
00 59
00-15
settings (the memory clear
del
Detailed Operation
Default
Value
no
no
00
00
00
00
00
00