Respironics 920M PLUS Operator's Manual page 19

Clearing Memory
Upon entering setup mode, "
indicating the memory clear function. (Refer to "Setup Mode" on page 11.)
This function allows you to delete all data currently stored in memory. Refer
to Figure 6 below for a diagram describing the memory clear settings.
To Choose Memory Clear Settings:
1. " " may be set to "
Clr
If " " is entered in response to "
no
want to clear the memory), the setup mode will continue directly to the
calendar and clock settings. (Refer to "Calendar and Clock Settings" on
page 14.)
If " " is entered in response to "
yes
appear in the SpO
This redundant prompting gives you a second opportunity to avoid
clearing the memory.
Make the "
Clr
the values. Use the On/Standby switch to accept a value and move to
the next setting.
2. If " " is entered in response to "
no
the calendar and clock settings.
If " " is entered in response to "
yes
want to clear the memory), then "
displays indicating that the memory is cleared. The 920M PLUS will
then exit setup mode and is ready to begin normal operation.
Make the "
del
Use the advance switch to scroll
through the values.
Use the on/standby switch to accept a
value and move to the next setting.
Detailed Operation
" will appear in the SpO
Clr
" or "
no
display, again with a choice of "
2
" selection. Use the advance switch to scroll through
" selection.
Clear the memory?
YES
del
clearing the memory?
YES
Begin normal operation.
Figure 6. Choosing memory clear settings.
".
yes
" (indicating that you do not
Clr
", then "
Clr
", the setup mode continues to
del
", (confirming that you do
del
" will briefly appear in the
dne Clr
NO
CLr
(default)
NO
(default)
Confirm "yes" to
dne
clr
display,
2
" will next
del
" or " ".
no yes
Continue to the
calendar and clock
settings.
Continue to the
calendar and clock
settings.
13