Storage, Monitor, Display, Audio And Setup Settings - Blackmagicdesign Video Assist Installation And Operation Manual

To record optimum audio without clipping, adjust the sliders on each input until the levels are
peaking between -12 and -6 on the XLR input audio meters.
Refer to the 'monitoring using on screen meters' section for more information.

Storage, Monitor, Display, Audio and Setup Settings

Swipe the touchscreen left or right to open additional settings and information. Here you can
monitor storage information for your SD card, format your card, adjust monitor and display
settings, plus change the date and time. On Blackmagic Video Assist 4K, you can also adjust
audio settings. To hide the settings and return to your video image, swipe left or right, or tap the
'back' icon at the bottom left corner on Blackmagic Video Assist 4K.
Storage Settings
The storage settings let you monitor the capacity of your inserted SD cards, format type, for
example HFS+ or exFAT, and the amount of free space available. You can also format your cards
directly using your Video Assist. For information on formatting SD cards, refer to the 'about SD
cards' section.
Monitor Settings
In the monitor settings, you can choose from two different types of focus assist tools and adjust
their settings, plus change the rotation of the display based on the physical positioning
of the unit.
Focus Assist
Select 'lines' to display colored outlines around sharp areas of the image, or 'peaking'
to display exaggerated sharpening detail around the areas of the image that
are in focus.
Settings 18