Alarm History Screen - ZyXEL Communications SAM1316-22 User Manual

Chapter 41 Alarm

41.6 Alarm History Screen

This screen displays the alarms that have been raised by the SAM1316-22,
including the severity level of an alarm(s) and the date/time when the alarm
occured.
To open this screen, click Alarm, Alarm History.
Figure 124 Alarm Status
The following table describes the labels in this screen.
Table 99 Alarm Status
LABEL
Alarm Status
Alarm Event
Setup
Alarm Port Setup
Alarm Type
Refresh
Clear
No
Alarm
Condition
Severity
Timestamp
Source
258
DESCRIPTION
Click Alarm Status to go to a screen that displays the alarms that
are currently in the system (see
Click Alarm Event Setup to go to a screen where you can configure
the severity level of an alarm(s) and where the system is to send the
alarm(s). See Section 41.4 on page
Click Alarm Port Setup to go to a screen where you can configure
the alarm severity threshold for sending SNMP traps or sys logs for
alarms on an individual port(s). See
Select which type of alarms to display by Severity, or select All to
look at all the alarms.
Click this button to update this screen.
Click this button to erase the clearable alarm entries.
This field displays the index number of the alarm entry in the system.
This field displays the alarm category to which the alarm belongs.
This field displays a text description for the condition under which the
alarm applies.
This field displays the alarm severity level (critical, major, minor or
info).
This field displays the month, day, hour, minute and second that the
system created the log.
This field displays where the alarm originated. This is either a DSL
port number, one of the Ethernet ports (enet 1 or 2), or "eqpt" for the
system itself.
Section 41.2 on page 251).
253.
Section 41.5 on page
SAM1316-22 User's Guide
256.