ZyXEL Communications SAM1316-22 User Manual page 211

The following table describes the labels in this screen.
Table 71 DSCP Map
LABEL
DSCP Map
Source DSCP
802.1P Priority
Apply
SAM1316-22 User's Guide
DESCRIPTION
Click DSCP Setup to open the screen where you can activate or
deactivate DSCP on each port (see
This field displays each DSCP value.
Enter the IEEE 802.1p priority to which you would like to map this
DSCP value.
Click Apply to save your changes to the SAM1316-22's volatile
memory. The SAM1316-22 loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Chapter 30 DSCP
Section 30.2 on page 209).
211