Ip Setup; Chapter 11 Ip Setup - ZyXEL Communications SAM1316-22 User Manual

C
H A P T E R
The IP Setup screen allows you to configure a device IP address, subnet mask
and DNS (domain name server) for management purposes.
To open this screen, click Basic Setting, IP Setup.
Figure 41 IP Setup
The following table describes the labels in this screen.
Table 16 IP Setup
LABEL
IP
IP Mask
Apply IP setting
Cancel
Default Gateway
SAM1316-22 User's Guide
DESCRIPTION
Enter the IP address of your SAM1316-22 in dotted decimal notation
for example 1.2.3.4.
Enter the IP subnet mask of your SAM1316-22 in dotted decimal
notation for example 255.255.255.0.
Click Apply IP setting to save your changes to the device's IP
address and/or subnet mask to the SAM1316-22's volatile memory.
The SAM1316-22 loses these changes if it is turned off or loses power,
so use the Config Save link on the navigation panel to save your
changes to the non-volatile memory when you are done configuring.
Click Cancel to begin configuring the fields again.
Enter the IP address of the default outgoing gateway in dotted
decimal notation.
11

IP Setup

87