Multicast Vlan Group Set Command; Multicast Vlan Group Delete Command - ZyXEL Communications SAM1316-22 User Manual

Chapter 52 IGMP Commands
This command displays the current multicast VLAN settings. In the state column,
"-" indicates the multicast VLAN is not active while "V" indicates the multicast
VLAN is active.
Figure 191 Multicast VLAN Show Command Example
ras> switch igmpsnoop mvlan show 1
vid name
---- ---------------- ----------------------------------------

52.8.6 Multicast VLAN Group Set Command

Syntax:
ras> switch igmpsnoop mvlan group set <vid> <index> <start-mcast-ip> <end-
mcast-ip>
where
<vid>
<index>
<start-mcast-
ip>
<end-mcast-ip>
This command creates a multicast VLAN group. The following example creates a
multicast VLAN with VID 10 and group index 1. The multicast address range is
224.224.224.1 ~ 224.224.224.10.
Figure 192 Multicast VLAN Group Set Command Example
ras> switch igmpsnoop mvlan group set 10 1 224.224.224.1
224.224.224.10

52.8.7 Multicast VLAN Group Delete Command

Syntax:
ras> switch igmpsnoop mvlan group delete <vid> <index>
where
<vid>
<index>
354
F:fixed X:forbidden
The multicast VLAN ID [1 – 4094].
=
1..16; a unique number for this setting.
=
Start of the multicast IP address range.
=
End of the multicast IP address range.
=
The multicast VLAN ID [1 – 4094].
=
1..16; a unique number for this setting.
=
U:untag T:tag
SAM1316-22 User's Guide