Turn The Message Alert Tone On Or Off; Voice Guide - VTech DS5151-2 User Manual

Turn the message alert tone on
or off
When the message alert tone is set
to on, and there is at least one new
message, the telephone base beeps
every 10 seconds.
tone is preset to off.
There is no audible alert at the handset.
1. Press MENU on the handset or the
telephone base when it is not in use.
2. Press or
sys, then press SELECT.
3. Press or
setup, then press SELECT.
4. Press or
tone, then press SELECT.
5. Press or
Press SELECT to save and you hear
6.
a confirmation tone.
NOTES
• The answering system must be turned on
for the message alert tone to be functional.
• Press any key on the telephone base
(except
temporarily silence the message alert tone.
The message alert
to scroll to Answering
to scroll to Ans sys
to scroll to Msg alert
to select On or Off.

Voice guide

This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide to
record your own announcement, set the
number of rings and the message alert
tone.
NOTE
• This feature is only available in the
telephone base.
1. Press MENU on the telephone base
when the phone is not in use.
2. Press
sys, then press SELECT.
3. Press
and then press SELECT. You hear
the voice prompt "Hello! This voice
guide will assist you with the basic
setup of your answering system."
4. Set up your answering system by
inputting designated numbers as
instructed in the voice guide.
NOTE
) to
• You can press
guide at anytime.
40
or to choose Answering
or to choose Voice guide,
CANCEL
to quit the voice