Change A One-To-One Ptt To Intercom Call - VTech DS5151-2 User Manual

Answer a PTT call
You can respond to a PTT call whenever
the speakerphone light is off, as
described below.
1. When your device receives a PTT
call, it beeps and displays Press and
hold [PTT] to talk.
2. When the other party is speaking,
your speakerphone light is on, and
your device displays:
• PTT From HS X To HS Y (X
represents the originating handset
and Y represents your handset
number; a maximum of four
handset numbers appear).
-OR-
• PTT From HS X To Base & HS
Y (X represents the originating
handset and Y represents your
handset number; a maximum of
four handset numbers appear).
-OR-
• PTT From Base To HS X (X
represents your handset number;
a maximum of five handset
numbers appear).
3. When your speakerphone light is
off and the handset displays Press
and hold [PTT] to talk, press and
hold PTT on your handset or on the
telephone base. When you hear a
chirp, speak towards the device.
• While you are speaking,
your device displays PTT To
Handset: X (X represents the
handset numbers of one or more
destination handsets; a maximum
of five handset numbers appear)
or PTT To Base & Handset: X (X
represents the handset numbers
of one or more destination
handsets; a maximum of four
handset numbers appear).
• Your voice is broadcast to all
destination devices.
After speaking, release PTT on your
handset or telephone base. Your
device will beep. After the beep, if
your speakerphone light is off, you can
press and hold PTT on your handset or
telephone base to speak again, or the
destination device can respond.
Change a one-to-one PTT to
intercom call
You can convert a one-to-one PTT
session to an intercom call.
1. When your device displays Press
and hold [PTT] to talk, press MENU
on the handset or the telephone
base. The screen shows Intercom.
Press SELECT.
2. Your device displays Calling BASE
0 or Calling HANDSET X. The
destination device briefly shows
Push to talk Ended and then
HANDSET X is calling or BASE 0 is
calling. The destination device rings.
3. Press
(0-9, # or TONE ) on the destination
handset, or press
keys (0-9, # or TONE ) on the
telephone base to answer the
intercom call. Both devices now show
Intercom.
4. To end the intercom call, press
on your handset or place
the handset in the telephone base
or charger, or press CANCEL on
the telephone base. Both screens
display Intercom ended.
24
or any dialing keys
or any dialing