Default Announcement; Record Your Own Announcement; Play Your Announcement; Delete Your Announcement - VTech DS5151-2 User Manual

4. Press or
then press SELECT to confirm. You
hear a confirmation tone.
NOTES
• When you turn on the answering system
at the telephone base with no memory
capacity left, Rec mem full displays on the
handset and telephone base.
• If the memory capacity is less than 3
minutes, the telephone announces, "Less
than three minutes to record."

Default announcement

The telephone is preset with a greeting
that answers calls with, "Hello. Please
leave a message after the tone." You
can use this preset announcement, or
replace it with your own.

Record your own announcement

The announcement can be up to
seconds in length.
1. Press MENU on the handset or the
telephone base when it is not in use.
2. Press or
sys, then press SELECT.
3. Press SELECT again to select
Announcement.
4. Press SELECT to select Record annc.
The system announces, "Record after
the tone. Press 5 when you are done."
5. After the tone, speak towards the
microphone.
6. Press 5 when done. The answering
system automatically plays back the
newly recorded announcement, then
returns to the previous menu.
-OR-
Press
CANCEL on the telephone base to
return to the previous menu.
NOTE
• Announcement shorter than two seconds
will not be recorded.
to scroll to On or Off,
90
to scroll to Answering
on the handset or

Play your announcement

1. Press MENU on the handset or the
telephone base when it is not in use.
2. Press or
sys, then press SELECT.
3. Press SELECT again to select
Announcement.
4. Press or
then press SELECT.
Options during playback:
• Press /VOLUME/ on the handset or
on the telephone base to adjust the
listening volume.
• Press 5 to stop playback.
• Press on the handset to switch to
speakerphone mode.

Delete your announcement

1. Press MENU on the handset or the
telephone base when it is not in use.
2. Press or
sys, then press SELECT.
3. Press SELECT again to select
Announcement.
4. Press or
then press SELECT.
5. While the announcement is
playing, press DELETE to delete
the announcement. The system
announces "Announcement deleted"
and the screen displays Annc.
deleted. You hear a long beep.
-OR-
1. Press MENU on the handset or the
telephone base when it is not in use.
2. Press or
sys, then press SELECT.
3. Press SELECT again to select
Announcement.
38
to scroll to Answering
to scroll to Play annc,
to scroll to Answering
to scroll to Play annc,
to scroll to Answering