Install the battery
Install the battery as shown below.
NOTES
•
Use only supplied battery.
•
Charge the battery provided with this
product only in accordance with the
instructions and limitations specified in this
manual.
•
If the handset will not be used for a long
time, disconnect and remove the battery to
prevent possible leakage.
Check the battery level
After you have installed the battery,
check the battery level on the handset
screen.
•
If the battery icon is ,
go to Before use section to set the
date and time, and set the answering
system through voice guide.
•
If the screen is blank, or flashes,
then the battery needs to be charged.
Go to Charge the battery section
before you do any setting or operation.
Charge the battery
Place the handset in the telephone base
or handset charger to charge.
Once you have installed the battery,
the handset LCD display indicates the
battery status (see the table on next
page).
NOTES
•
Press CANCEL on the handset or place
the handset in the charger will bypass the
set date and time.
•
For best performance, keep the handset
in the telephone base or charger when not
in use.
•
The battery is fully charged after 12 hours
of continuous charging.
8
or , then