Turn The Message Alert Tone On Or Off; Voice Guide - VTech CS5129 User Manual

Turn the message alert tone on
or off
When the message alert tone is set
to on, and there is at least one new
message, the telephone base beeps
every 10 seconds.
1. Press MENU when the phone is not
in use.
2. Press q or p to choose Answering
sys and then press SELECT.
3. Press q or p to choose Ans sys
setup and then press SELECT.
4. Press q or p to choose Msg alert
tone, and then press SELECT.
5. Press q or p to choose On or Off,
and then press SELECT to save.
You hear a confirmation tone.
NOTES
• The answering system must be turned on
for the message alert tone to be functional.
• Press any key on the telephone base
(except FIND HANDSET) to temporarily
silence the message alert tone.

Voice guide

This feature is an alternative way for you
to do the basic setup of the answering
system. You can follow the voice guide to
record your own announcement, set the
number of rings and the message alert
tone.
1. Press MENU when the phone is not
in use.
2. Press q or p to choose Answering
sys and then press SELECT.
3. Press q or p to choose Voice
guide and then press SELECT.
You hear the voice prompt "Hello!
This voice guide will assist you with
the basic setup of your answering
system."
4. Setup your answering system by
inputting designated numbers as
instructed in the voice guide
NOTE
• You can press CANCEL to quit the voice
guide at anytime.
26