Body Solid SMR1000 Owner's Manual page 10

S T E P
1
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step.
A. Connect Base Plate (C) and 50x150mm Support Plate (F) to Right Base Frame (A) using:
Two 1 (M12x100 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
B. Connect Base Plate (C) and 50x150mm Support Plate (F) to Left Base Frame (L) using:
Two 1 (M12x100 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
Do Not wrench tighten until end of Step 3.
10