Body Solid SMR1000 Owner's Manual page 18

S T E P
5
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten all hardware in this step.
A. Connect Left Rear Rack (TL) to Rear Upright Frame (Q) as shown using:
Three 2 (M12x95 hex head bolt)
Six 8 (M12 washer)
Three 7 (M12 nylon lock nut)
B. Connect the remaining Right Rear Rack (TR) to Rear Upright Frame (Q) using:
Three 2 (M12x95 hex head bolt)
Six 8 (M12 washer)
Three 7 (M12 nylon lock nut)
C. Connect Left Front Rack (HL) to Front Upright Frame (B) as shown using:
Two 2 (M12x95 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
D. Connect the remaining Right Front Rack (HR) to Front Upright Frame (B) using:
Two 2 (M12x95 hex head bolt)
Four 8 (M12 washer)
Two 7 (M12 nylon lock nut)
E. Attach Spotter Bar (M) to Left Rear Rack (TL) and Left Front Rack (HL)
F. Attach the remaining Spotter Bar (M) to Right Rear Rack (TR) and Right Front Rack
(HR).
Congratulations! You are done. After assembly, you should check all functions to ensure correct operation. If
you experience problems, first recheck the assembly instructions to locate any possible errors made during
assembly. if you are unable to correct the problem, call the dealer from whom you purchased the machine
or call 1-800-556-3113 for the dealer nearest you.
NOTE:
If any bolts seem to loosen periodically, use Loctite 242 for a long-term cure.
This gym is capable of a variety of different exercises, as well as, smooth and user-friendly adjustment fea-
tures. The following page of adjustments will help you to familiarize yourself with your new gym. We hope
you are completely satisfied with this product and wish you many years of enjoyment.
18