Transceiver Module Does Not Support Digital Diagnosis; Symptom - H3C S5560-EI Series Troubleshooting Manual

Transfer Distance(m)
Digital Diagnostic Monitoring : YES
Vendor Name
2. Perform either of the following tasks:
If the vendor name field does not display H3C, replace the transceiver module with an H3C
transceiver module.
If the vendor name field displays H3C, execute the display hardware internal transceiver
register interface command in probe view. Provide the transceiver module information to H3C
Support to verify that the transceiver module is an H3C transceiver module. If it is not an H3C
transceiver module, replace it with an H3C transceiver module.
[Sysname-probe]display hardware internal transceiver register interface
Ten-GigabitEthernet 2/0/25 device a0 address 0 le 128
Ten-GigabitEthernet2/0/25 transceiver device a0 register information:
0000:
0008:
0010:
0018:
0020:
0028:
0030:
0038:
0040:
0048:
0050:
0058:
0060:
0068:
0070:
0078:
3. If the problem persists, contact H3C Support.
Transceiver module does not support digital
diagnosis

Symptom

The output from the display transceiver diagnosis interface command shows that the transceiver module
does not support the digital diagnosis function.
<Sysname> display transceiver diagnosis interface ten-gigabitethernet 1/0/51
The transceiver does not support this function.
: 100(OM3),150(OM4)
: H3C
03 04 07 00
00 00 00 03
00 00 00 00
6e 73 65 20
20 20 20 20
4c 54 44 31
42 43 2b 2d
57 20 20 20
00 1a 14 14
39 43 30 30
20 20 20 20
30 31 20 20
48 33 43 00
00 00 00 00
00 00 00 00
00 00 00 9e
00 00 02
0d 00 64
48 69 73
20 20 20
00 00 00
35 33 31
48 33 43
06 0e 00
5a 57 35
30 30 38
30 39 31
68 b0 01
00 00 00
00 00 00
00 06 0e
00 89 00
30
00
00
65
20
00
2d
20
d4
30
20
32
f2
00
00
05
fe