Branson 00 Series Operator's Manual page 89

< How to fold up ROPS >
1. Pull the pins on both sides of the
tractor and turn them about 1/4
turns to release the lock of the
ROPS.
2. Raise the ROPS a little.
3. Replace the pins.
4. Stand the ROPS up, and the pins
will lock into place.
※ If it is not certain whether the pins
are fixed, shake the ROPS a little
bit to fix the pins for sure.
5. Turn the handle to fix the push
plate and the frame.
CAUTION
•
Don't fasten your seat belt af-
ter folding ROPS.
•
When you drive tractor, fold
up vertically.
[Otherwise]
If the tractor rolls over, you
could be injured or death may
occur.
CAUTION
•
Fasten your seat belt after
folding up ROPS.
•
When working with the tractor,
don't fold down ROPS.
•
Don't change ROPS without
authority.
•
Before using tractor, check
your ROPS support and other
parts.
•
I f t h e r e i s d a m a g e t o t h e
ROPS, change ROPS at once.
[Otherwise]
If the tractor rolls over, you
could be injured or death may
occur.
※ ROPS are a very important struc-
ture for protection on roll over, AL-
WAYS check your ROPS
5
OPERATION & WORK 
-
5