Rops Folding Method; How To Fold Down The Rops; How To Fold Down The Rops - Branson 00 Series Operator's Manual

5

BRANSON 00 SERIES
-
CAUTION
The following safety precautions
should be thoroughly understood
before attempting machine as-
sembly.
•
Do not lift heavy parts or as-
semblies. Use crane, jack,
tackle, fork trucks, or other
mechanical devices.
•
Select an area for assembly
that is clean and free of any
debris which might cause per-
sons working on the assembly
to trip.
•
Arrange parts to be assem-
bled neatly in the work area
and have tools and other me-
chanical assisting devices in
easy reach.
•
Inspect all parts and assem-
blies thoroughly and remove
any sharp edges, grease, oil,
o r d i r t w h i c h m i g h t c a u s e
pieces to slip when handling.
CAUTION
•
Preview the assembly instruc-
tions in your operator's manu-
al before proceeding further.
•
If the assembly instructions
call for parts or assemblies to
be blocked up, use only block-
ing material that is in good
condition and is capable of
handling the weight of the as-
sembly to be blocked. Also, in-
sure that the blocking material
is on a clean, dry surface.
•
Never put hands or any oth-
er body under blocked up as-
semblies if at all possible.
•
Always wear goggles or safe-
t y g l a s s e s w h e n h a m m e r -
ing, grinding or drilling metal
parts.
•
If the assembly calls for weld-
ing or cutting, be sure that
there are no flammable materi-
als close at hand and that by-
standers have taken neces-
sary precautions.

ROPS FOLDING METHOD

HOW TO FOLD DOWN THE ROPS

B
C
A
(A) Pull the pins on both
(B) Push the safety frame
(C) Replace the pins
1. Turn the handle to separate the
push plate and the ROPS.
2. Pull the pins on both sides of the
tractor and turn them about 1/4
turns to release the lock of the
ROPS.
3. Raise the ROPS a little.
4. Replace the pin.
5. Fold down the ROPS, and the pins
will lock into place.
※ If it is not certain whether the pins
are fixed, shake the frame a little
bit to fix the pins for sure.
BR00O525A