Filters / Coolant Replacement; Engine Oil Filter; Engine Oil Filter - Branson 00 Series Operator's Manual

7
10 BraNsON 00 sErIEs
-
(1) Drain Plug
►CHANGING OIL
Drain the fluid through three drain
holes under the front axle.
refill the fluid from the upper right
side of the front axle

FILTERS / COOLANT REPLACEMENT

ENGINE OIL FILTER

1
Br00O707a

(1) Engine Oil Filter

replace it every 300 hours or when
engine oil is changed.
•
f i r s t 5 0 h r f i l t e r h a s t o b e
changed.
1
Br00O708a
NOTE
►REPLACEMENT
1. after draining the engine oil, turn
the cartridge to the left with the fil-
ter wrench.
2. Apply a thin film of oil over the rub-
ber ring on the bottom of the new
cartridge and attach the new filter
securely.
3. after changing the engine oil, start
the engine and run it until the en-
gine oil pressure warning lamp is
turned off .
4. after the oil pressure warning
lamp is turned off, check the oil
level again. add oil as necessary.