Branson 00 Series Operator's Manual page 73

B
(1) Accereration Lever
(A) Increase (B) Decrease
4. Put the acceleration lever to Min
a turn ignition switch to "ON" posi-
tion.
LXN5O401A
(1) Range Shift lever
5. After the pre-heat lamp has turned
off, depress the clutch pedal ful-
1
ly and turn the ignition switch to
A
START.
6. Once the engine has started, take
your hand off the ignition switch.
BR00O505A
BR00O502A
1 1
1
BR00O506A
(1) Engine Rpm Indicator
7. Increase the engine to about
1,500rpm and warm it up for about
five minutes without a load.
•
Never put your feet on the
clutch pedal during driving or
working.
[Otherwise]
It may cause an accident or
quick wear of the clutch disks.
5
OPERATION & WORK 11
-
BR00O507A
CAUTION
5