Pto Lever; Pto Lever; Stop/Slow Return Valve; Stop/Slow Return Valve - Branson 00 Series Operator's Manual

4
1 BrANSoN 00 SErIES
-

PTO LEVER

2

(1) PTo lever

(2) Mid PTo 2500
The revolution of the PTo shaft can
be shifted in two levels. (1st Rear
540 rpm : 2nd Rear 960 rpm - Mid
2500 rpm) When shifting level, press
clutch pedal deeply.
CAUTION
•
Observe the PTO speed desig-
nated on the work unit.
•
Otherwise, the work unit may
be damaged and cause an ac-
cident.
1
BR00O430A
(1) Mid PTo
The mid PTO is available for Bran-
son approved implements.

STOP/SLOW RETURN VALVE

1
BR00O431A

(1) Stop/Slow Return Valve

(A) open
It is used to regulate the lowering
speed of the work unit (slow return
function). Also, if you wind the valve
fully to the right, the hydraulic pres-
sure to the device raising the work
unit is stopped.
A
1
B
BR00O425A
(B) Close