Flow Sensor „High Flow Usb; Technology And Specific Characteristics; Integration Into The Cooling Loop; Pressure Sensor Mps Pressure ∆40/∆100/∆500/1000/ ∆1000 - Aqua Computer mps flow 100 User And Installation Manual

aqua computer
5. Flow sensor „high flow USB" 5. Flow sensor „high flow USB" 5. Flow sensor „high flow USB" 5. Flow sensor „high flow USB"

5.1. Technology and specific characteristics

5.1. Technology and specific characteristics
5.1. Technology and specific characteristics 5.1. Technology and specific characteristics
The flow sensor „high flow USB" features an integrated impeller which is driven by
coolant flow through the sensor. Movement of the impeller is electronically detect-
ed and converted into a flow value.

5.2. Integration into the cooling loop

5.2. Integration into the cooling loop 5.2. Integration into the cooling loop 5.2. Integration into the cooling loop
Install suitable fittings into the threads of the sensor. Gently tighten the fittings by
hand and do not use excessive force in order not to damage the threads in the
plastic body. Connect both sides of the sensor to your cooling loop, flow direction
is not relevant for this sensor.
For electrical connections and configuration of the sensor please refer to chapter
eight and following chapters.
6. Pressure sensor mps pressure ∆ ∆ ∆ ∆ 40/ 6. Pressure sensor mps pressure 6. Pressure sensor mps pressure 6. Pressure sensor mps pressure
∆1000 ∆1000
∆1000 ∆1000
6.1. Technology and specific characteristics 6.1. Technology and specific characteristics 6.1. Technology and specific characteristics 6.1. Technology and specific characteristics
Pressure sensors of the mps pressure series can be utilized in a variety of situations:
The sensors can be used as fill level sensors
voir. In this configuration, the sensor detects the pressure generated by the water
column inside the reservoir.
Another field of application is differential pressure measurement across filter ele
ments to monitor residues and clogging as a much more precise maintenance in- ments
ments ments
dicator than optical inspection. Accordingly, residues and clogging in micro struc-
ture coolers can be monitored.
A differential pressure measurement between inlet and outlet of a pump
used for operation monitoring and provide valuable information for hardware
testers.

6.2. Installation of fittings

6.2. Installation of fittings 6.2. Installation of fittings 6.2. Installation of fittings
Install suitable fittings into the threads of the sensor. Gently tighten the fittings by
hand and do not use excessive force in order not to damage the threads in the
plastic body.
© 2012-2016
fill level sensors for virtually any type and size of reser- fill level sensors fill level sensors
differential pressure measurement across filter ele- - - -
differential pressure measurement across filter ele differential pressure measurement across filter ele
Aqua Computer GmbH & Co. KG
Gelliehäuser Str. 1, 37130 Gleichen
40/∆100/∆500/1000/ 40/ 40/ ∆100/∆500/1000/ ∆100/∆500/1000/ ∆100/∆500/1000/
pump can be
pump pump
MPS
- 7 -