Removing And Replacing The Power Supply Unit And Airflow Guide - HP Vectra VE 6/xxx - 8 Maintenance Manual

Removing and Replacing the Power Supply Unit and
Airflow Guide
To improve access to the system board you may need to remove the
power supply unit and airflow guide. The airflow guide is attached to
the power supply unit, so when you remove the power supply unit you
also remove the airflow unit.
To remove the power supply unit and airflow guide:
1 Disconnect the PC's power supply cord and any connection to a
telecommunications network.
2 Remove the PC's cover.
3 While supporting the power supply unit with one hand, remove its
retaining screw and unclip the unit from the top of the PC chassis.
4 Gently place the power supply unit and airflow guide next to the PC.
Take care not to put any strain on any of the cables.
5 Install any accessories that you need to.
6 Secure the power supply unit and airflow guide back in position
before replacing the cover. Reconnect all cables and power cords.
2 How to Install Accessories in Your Minitower PC

Removing and Replacing the Power Supply Unit and Airflow Guide

Unclip the power
supply unit here
Airflow
Guide
English 33