Accessories - Craftsman 315.101160 Operator's Manual

n Insert the hex key into the chuck and tighten the
chuck jaws securely. Tap sharply with a mallet in a
counterclockwise direction. This will loosen the chuck
on the spindle. It can now be unscrewed by hand.
HEX KEY
Look for these accessories at Sears retail:
n High Speed Bits (For wood or metal) ............................................................................................................. 1/2 in. Max.
n Masonry Bits................................................................................................................................................... 3/4 in. Max.
n Wood Boring Bits ........................................................................................................................................1-1/4 in. Max.
n Hole Saws ...................................................................................................................................................2-1/2 in. Max.
n Drill Stand
n Doweling Jig
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use
any attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or
accessories not recommended can result in serious personal injury.
MAINTENANCE
MALLET
CHUCK
Fig. 11

ACCESSORIES

15
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and develop
a wobble. Also, the chuck screw may become loose,
causing the chuck jaws to bind and prevent them from
closing. To tighten:
n Unplug the drill.
n Open the chuck jaws.
n Insert a hex key into the chuck and tighten chuck jaws
securely. Tap the hex key sharply with a mallet in a
clockwise direction. This will tighten the chuck on the
spindle.
n Open the chuck jaws and remove the hex key.
n Tighten the chuck screw.