Maintenance; Accessories - Craftsman 973.113450 Operator's Manual

WARNING:
When servicing, use only identical
Craftsman replacement parts. Use of any other
part may create a hazard or cause product damage.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING:
Do not at any time let brake fluids,
gasoline, petroleum-based products, penetrating oils,
etc. come in contact with plastic parts. They contain
chemicals that can damage, weaken or destroy
plastic.
BATTERIES
Your drill's battery pack is equipped with nickel-cadmium
rechargeable batteries. Length of service from each
charging will depend on the type of work you are doing.
The batteries in this tool have been designed to provide
maximum trouble free life. However, like all batteries, they
will eventually wear out. Do not disassemble battery pack
and attempt to replace the batteries. Handling of these
batteries, especially when wearing rings and jewelry,
could result in a serious burn.
To obtain the longest possible battery life, we suggest the
following:
To preserve natural resources, please
Y
recycle or dispose of batteries properly.
R B R C
This product contains nickel-cadmium
batteries. Local, state or federal laws
N i C d
may prohibit disposal of nickel-cadmium
batteries in ordinary trash.
Consult your local waste authority for information
regarding available recycling and/or disposal options.
The following recommended accessories are currently available at Sears Retail Stores.
■ 6-Pc. Extra Length Magnite Power Bit Set
■ 30-Pc. Power Screwdriver/Nutdriver Set and Case
■ 17-Pc. Power Screwdriver/Nutdriver Set and Case
WARNING:
The use of attachments or accessories not listed might be hazardous.

MAINTENANCE

Do not abuse power tools. Abusive practices can
damage tool as well as workpiece.
Only the parts shown on parts list, page 17, are intended
to be repaired or replaced by the customer. All other parts
should be replaced at a Sears Service Center.
WARNING:
create accessories not recommended for use with
this tool. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
■ Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery life.
■ Never store batteries in a discharged condition.
Recharge them immediately after they are
discharged.
■ All batteries gradually lose their charge. The higher
the temperature the quicker they lose their charge. If
you store your tool for long periods of time without
using it, recharge the batteries every month or two.
This practice will prolong battery life.
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
WARNING:
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery pack or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of properly.
Also, never touch both terminals with metal objects
and/or body parts as short circuit may result. Keep
away from children. Failure to comply with these
warnings could result in fire and/or serious injury.

ACCESSORIES

ACCESSORIES
■ High Speed Bits......1/2 in. Max.
■ Wood Boring Bits......1-1/2 in. Max.
15
Do not attempt to modify this tool or
Upon removal, cover the battery pack's