Summary of Contents for Craftsman 10107 - 3/8 in. Corded Drill
Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman Save this manual for future reference 983000-740 6-14-06 (REV:01)
If this Craftsman tool fails to give complete satisfaction within one year from date of purchase, RETURN IT TO THE NEAREST SEARS STORE IN THE UNITED STATES, and Sears will replace it, free of charge. If this Craftsman tool is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase.
 Remove any adjusting key or wrench before turning WARNING! Read all instructions. Failure to follow the power tool on. A wrench or a key left attached to all instructions listed below may result in electric a rotating part of the power tool may result in personal shock, fire and/or serious injury.
Maintenance section of this manual. Use of SERVICE unauthorized parts or failure to follow Maintenance  Have your power tool serviced by a qualified repair instructions may create a risk of shock or injury. person using only identical replacement parts. This will ensure that the safety of the power tool is WARNING! To reduce the risk of injury, user must...
Some ofthefollowing s ymbols maybeusedonthistool.Please study themandlearn theirmeaning. Proper i nterpretation ofthesesymbols willallowyouto operate thetool betterandsafer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Current Am pe res Hertz Frequency (cycles per second) Watt Power Minutes Time Alternating Current Type of current Direct Current Type or a characteristic of current No Load Speed...
Thefollowing signal w ordsandmeanings a reintended to explain the levels ofriskassociated w iththis product. SYMBOL SIGNAL MEANING Indicates an imminently hazardous situation, which, if not avoided, will DANGER: result in death or serious injury. Indicates a potentially hazardous situation, which, if not avoided, could WARNING: result in death or serious injury.
DOUBLE INSULATION EXTENSION CORDS Double insulation is a concept in safety in electric power When using a power tool at a considerable distance from tools, which eliminates the need for the usual three-wire a power source, be sure to use an extension cord that has grounded power cord.
LIVE TOOL INDICATOR KNOW YOUR DRILL See Figure 1. The live tool indicator is located on the handle of the Before attempting to use this product, familiarize yourself drill and indicates that the tool is connected to a power with all operating features and safety rules. supply.
KEYLESS CHUCK WARNING: Do not allow familiarity with tools See Figure 2. to make you careless. Remember that a careless The drill has a keyless chuck. As the name implies, you fraction of a second is sufficient to inflict serious can hand tighten or release drill bits in the chuck jaws.
UNLOCK WARNING: Always unplug the tool when installing CHUCK (RELEASE) CHUCK or removing bits, adjusting settings, or when the tool is not in use. Failure to unplug the tool may result in JAWS BODY accidental starting and serious personal injury. INSTALLING BITS See Figures 3 - 4.
LOCK-ON BUTTON DRILLING See Figure 5. See Figures 6- 7, This drill is equipped with a lock-on feature, which is Levels are located on the top and end of the motor convenient for continuous drilling for extended periods of housing to help keep the drill bit level during use. time.
WARNING: When servicing, use only identical spackling compounds, or plaster are subject to Craftsman replacement parts. Use of any other parts accelerated wear and possible premature failure because may create a hazard or cause product damage. the fiberglass chips and grindings are highly abrasive to bearings, brushes, commutators, etc.
CHUCK REMOVAL TO RETIGHTEN A LOOSE CHUCK See Figure 7. See Figure 8. The chuck can be removed and replaced with a new one. The chuck may become loose on the spindle and develop a wobble. To tighten:  Unplug the drill.  Unplug the drill.
CRAFTSMAN 3/8 in. DRILL - MODEL NUMBER 315.101070 he model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your DRILL or when ordering repair parts. SEE BACK...
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories owner's manuals that you need to do-it-yourself. For Sears professional installation of home appliances...