Accessories - Craftsman 315.101150 Operator's Manual

MALLET
HEXKEY
TO RETIGHTEN A LOOSE CHUCK
The chuck may become loose on the spindle and develop
a wobble. Also, the chuck screw may become loose,
causing the chuck jaws to bind and prevent them from
closing. To tighten:
[] Unplug the drill.
[] Open the chuck jaws.
[] Insert a hex key into the chuck and tighten chuck jaws
securely. Tap the hex key sharply with a mallet in a
clockwise direction. This will tighten the chuck on the
spindle.
[] Open the chuck jaws and remove the hex key.
[] Tighten the chuck screw.
Fig. 12
Look for these accessories at Sears retail:
[] High Speed Bits (For wood or metal) .............................................................................................................. 1/2 in. Max.
[] Masonry Bits ................................................................................................................................................... 3/4 in. Max.
[] Wood Boring Bits ........................................................................................................................................ 1-1/4 in. Max.
[] Hole Saws .......................................................................................................................................................... 2 in. Max.
_ WARNING: Current attachments and accessories available for use with this tool are listed above. Do not use any
attachments or accessories not recommended by the manufacturer of this tool. The use of attachments or acces-
sories not recommended can result in serious personal injury.
15