Konica Minolta BIZHUB C658 User Manual page 90

2.15 Protecting Data in the HDD
% Touch [C] to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the Storage Management Settings screen.
6
Touch [OK].
% If the entered Encryption Key does not meet the setting requirements, a message that tells that the
entered Encryption Key cannot be used appears. Enter the correct Encryption Key.
% If the entered Encryption Key does not match, a message that tells that the Encryption Key does not
match appears. Enter the correct Encryption Key.
7
Make sure that a message appears prompting you to turn OFF and then ON the main power switch.
Now, turn OFF and then turn ON the main power switch.
% When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again,
the machine may not function properly.
8
The following screen appears after the machine has been restarted.
9
Call the Administrator Mode on the display from the control panel.
% For the procedure to call the Administrator Mode on the display, see page 2-2.
bizhub C658/C558/C458
2
2-68