Accessing The User Box And User Box File - Konica Minolta BIZHUB C658 User Manual

3.4 User Box Function
3.4.3

Accessing the User Box and User Box file

<From the Control Panel>
0
For the logon procedure, see page 3-2.
0
Do not leave the machine while you are in the user operation mode. If it is absolutely necessary to leave
the machine, be sure first to log off from the user operation mode.
1
Log on to the user operation mode through User Authentication from the control panel.
2
Touch [User Box].
3
Select the desired User Box and touch [Open].
% To save a new document, select [Save].
4
Enter the User Box Password from the keyboard.
% Touch [C] to clear the value entered last.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the previous screen.
5
Touch [OK].
% If a wrong User Box Password is entered, a message that tells that the authentication has failed ap-
pears. Enter the correct User Box Password.
% If the Enhanced Security Mode is set to [ON], entry of a wrong User Box Password is counted as
unauthorized access. If a wrong User Box Password is entered a predetermined number of times
(once to three times) or more set by the administrator, a message appears that tells that authenti-
cation has not been successful for any subsequent operation for authentication. The machine is
then set into an access lock state, rejecting any more logon attempts.
To cancel the access lock state, the administrator must perform the Release Setting. Contact the
administrator.
bizhub C658/C558/C458
3
3-25