Zte ZXR10 5900E Series Configuration Manual page 93

#cache entries 4096
cache timeout active 6000
#cache timeout inactive 1800
#cache timeout update 1800
#cache type normal
record netflow-original
exporter v5
$
Descriptions of the command output:
Command Output
#cache entries 4096
cache timeout active 6000
#cache timeout inactive 1800
record netflow-original
record src_and_dst_addr
exporter v5
This example shows what will be displayed after show ip flow record [<name>| netflow-ori
gnial] is used.
ZXR10(config)#show ip flow record
flow record src_and_dst_addr
match ipv4 source address
match ipv4 destination address
collect flow direction
collect flow sampler
collect interface input
collect interface output
collect counter bytes
collect counter packets
$
flow record src_and_dst_port
match transport destination-port
match transport source-port
collect counter bytes long
collect counter packets
$
ZXR10(config)#show ip flow record src_and_dst_addr
flow record src_and_dst_addr
match ipv4 source address
match ipv4 destination address
collect flow direction
SJ-20150114102049-002|2015-01-15 (R1.0)
Chapter 3 Network Management
Description
The cache size used by flow monitor is 4096
The active aging time is 6000s
The inactive aging time is 1800s
Use pre-set module netflow-original
Use self-defined src_and_dst_addr
Use self-defined flow exporter policy v5
3-23
ZTE Proprietary and Confidential