Netflow Configuration Examples; Figure 3-2 Netflow V5 Configuration Example - Zte ZXR10 5900E Series Configuration Manual

3.2.4 NetFlow Configuration Examples

NetFlow V5 Configuration Example
l Configuration Description
As shown in
and configure IP address to send the collected NetFlow packets to server.

Figure 3-2 NetFlow V5 Configuration Example

l
Configuration Thought
1. Configure flow exporter output, including server IP address, port number and
protocol type.
2. Configure sampler sampling rate and sampling mode.
3. Configure the size of flow monitor cache, active overtime value and inactive
overtime value, bind the configured flow exporter to system v5 module.
4. Bind flow monitor policy to interface, configure sampling type and direction.
5. Send packets, view the received packets by traffic analyze software on server.
l
Configuration Commands
ZXR10 configuration,
ZXR10#configure terminal
Enter configuration commands, one per line.
ZXR10(config)#flow exporter exp
ZXR10(config-flow-exporter)#destination 169.1.109.60
ZXR10(config-flow-exporter)#transport udp 2055
ZXR10(config-flow-exporter)#export-protocol netflow-v5
ZXR10(config-flow-exporter)#exit
ZXR10(config)#sampler sam
ZXR10(config-sampler)#mode deterministic 1-out-of 1024
ZXR10(config-sampler)#exit
ZXR10(config)#flow monitor mo
ZXR10(config-flow-monitor)#cache entries 4096
ZXR10(config-flow-monitor)#exporter exp
ZXR10(config-flow-monitor)#record netflow-original
ZXR10(config-flow-monitor)#cache timeout inactive 6000
ZXR10(config-flow-monitor)#cache timeout active 1800
ZXR10(config-flow-monitor)#exit
ZXR10(config)#interface gei-0/1/1/4
ZXR10(config-if)#ip flow monitor mo sampler sam unicast input
SJ-20150114102049-002|2015-01-15 (R1.0)
Figure 3-2, configure NetFlow on ZXR10, connect server to the ZXR10,
3-25
Chapter 3 Network Management
End with CTRL/Z.
ZTE Proprietary and Confidential