Figure 8-2 Poe Configuration Example - Zte ZXR10 5900E Series Configuration Manual

Figure 8-2 PoE Configuration Example

Configuration Flow
1. Enter PoE configuration mode.
2. Enable the PoE function for the ports connected to IP phones.
Configuration Commands
The configuration on the ZXR10 5950-36PM-H is as follows:
ZXR10(config)#poe
ZXR10(config-poe)#interface gei-0/1/1/5
ZXR10(config-poe-if-gei-0/1/1/1)#enable
ZXR10(config-poe-if-gei-0/1/1/1)#exit
ZXR10(config-poe)#interface gei-0/1/1/28
ZXR10(config-poe-if-gei-0/1/1/28)#enable
ZXR10(config-poe-if-gei-0/1/1/28)#exit
Configuration Verification
Run the show poe interface command to view PoE power supply information on the ports.
ZXR10(config-poe)#show poe interface gei-0/1/1/5
power up
power device
power device type
802.3af classification
interface current-power : 4.3w
interface avg-power
interface peak-power
peak-power time
interface temperaturte
SJ-20150114102049-002|2015-01-15 (R1.0)
: on
: delivering power
: IEEE802.3 AF power device
: class 0
: 4.3w
: 4.4w
: 2013:10:21 13:16:58
: 45℃
8-7
Chapter 8 PoE Configuration
ZTE Proprietary and Confidential